You are here

>
>
>
3 mol% Yttria-Stabilized Zirconia

3 mol% Yttria-Stabilized Zirconia

Outstanding Mechanical Performance

Among all ceramic oxide materials, tetragonal zirconia stabilized with the addition of 3mol% Y2O3 (Y-TZP) exhibits at room temperature the highest performance in terms of:

  • Bending strength
  • Toughness

Tetragonal zirconia also enables the manufacturing of ceramic parts with:

  • Excellent surface finishing
  • Superior wear resistance
  • Outstanding corrosion resistance

Saint-Gobain ZirPro offers world-leading 3mol% yttria-stabilized zirconia powders ranging from dry powder (CY3Z) suitable for injection molding or casting process to ready-to-press granules (GY3Z) used in uniaxial and isostatic pressing. Pigmented zirconia for decorative fine ceramic applications is also available. Please refer to ColorYZe page for more information.

All ZirPro powders are manufactured using a state-of-the-art chemical process to ensure excellent performance and consistent high quality.

 Yttria-Stabilized Zirconia
 CY3ZGY3Z
 Dry powderReady-to-press
Purity (%)99.99
Y2O3 (wt%)5.4
D50 (μm)0.360
Spray-dried granules
SSA (m²/g)7-157
Binder content (wt%)/3%
Typical applicationsAdvanced technical ceramics, wear resistance parts, optical fiber connectors

 

For other yttria-stabilized zirconia grades or additional information, contact us today!

Sixty microns RTP granule

ZirPro has developed a CY3Z portfolio that enables to address all needs in terms of applications and ceramic processing:

  • CY3Z-R grades (specific surface area of 7m²/g), are suitable for the manufacturing of advanced ceramic parts (grinding media, knives, cutting tools,…) by injection molding or casting
  • CY3Z-M (Specific surface area of 15m²/g) grades are suitable for the manufacturing of small size ceramic parts with very fine microstructure like Optical Fiber Connectors by Ceramic Injection Molding.

All of the powders are made using a state-of-the art chemical process, to ensure high purity (99,99%) and homogeneous sub-micronic particle size.

 

 CY3Z
 CY3Z-RSCY3Z-RACY3Z-MSCY3Z-MA
Al2O3 (wt%)/0.25/0.25
SSA (m2/g)715
D50 (µm)0.30.2
Density (g/cm3)≥ 6.05≥ 6.04
Bending Strength (MPa)>1000
Fracture Toughness (MPa.m0.5)5.5
Hardness (HV0.5)1250
 

* 3 pts bending (NF EN843-1); ** ISB (ASTM C1421); *** Vickers indentation.

For other yttria-stabilized zirconia grades or additional information, contact us today!

Sixty microns RTP granule

ZirPro offers 3 mol% yttria-stabilized zirconia ready-to-press granules (GY3Z-R60) that exhibit

  • High purity (99.9%)
  • Fine and homogeneous particle size
  • Advanced binder system

GY3Z-R60 allows the manufacturing of ceramic parts with outstanding mechanical performance.

ZirPro ready-to-press granules are used in advanced technical ceramics thanks to its excellent mechanical performance, excellent pressing ability and green machining.

 

 GY3Z-R60
Al2O3 (wt%)0.25
SSA (m2/g)7
D50 (µm)60 (granules)
Density (g/cm3)≥ 6.05
Bending Strength (MPa)>1000
Fracture Toughness (MPa.m0.5)5.5
Hardness (HV0.5)1250

* 3 pts bending (NF EN843-1); ** ISB (ASTM C1421); *** Vickers indentation.

For other yttria-stabilized zirconia grades or additional information, contact us today!